notes/hard_disks.md
2021-12-31 15:45:28 -05:00

19 lines
759 B
Markdown

RAID edits
* Enter the system setup menu at boot time, then you also have to press additional keys to get to the RAID screen
* create a new virtual disk and assign the new disks, then initialize the VD
Mounting the new VD
* find the disk with `fdisk -l | grep '^Disk'`
* create a partition table
* `fdisk /dev/sdb`
* `p` to list partition table if any
* `n` to create a new partition
* `w` to write the new partition
* format the new partition with `mkfs.ext4 /dev/sdb1`
* create an access folder, maybe at //mnt/backup
* run the mount `mount /dev/sdb1 /mnt/backup`
* edit fstab by adding
//dev/sdb1 /mnt/backup ext4 defaults 1 2
* somehow in the process an new systemctl service module is loaded based on fstab at runs at boot