2019-01-22 11:21:13 -05:00
|
|
|
#
|
|
|
|
# Licensed to the Apache Software Foundation (ASF) under one or more
|
|
|
|
# contributor license agreements. See the NOTICE file distributed with
|
|
|
|
# this work for additional information regarding copyright ownership.
|
|
|
|
# The ASF licenses this file to You under the Apache License, Version 2.0
|
|
|
|
# (the "License"); you may not use this file except in compliance with
|
|
|
|
# the License. You may obtain a copy of the License at
|
|
|
|
#
|
|
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
#
|
|
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
# See the License for the specific language governing permissions and
|
|
|
|
# limitations under the License.
|
|
|
|
#
|
2019-04-20 16:17:52 -04:00
|
|
|
FROM python:3.6-jessie
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
2018-11-27 14:19:55 -05:00
|
|
|
RUN useradd --user-group --create-home --no-log-init --shell /bin/bash superset
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
|
|
|
# Configure environment
|
|
|
|
ENV LANG=C.UTF-8 \
|
2018-11-27 14:19:55 -05:00
|
|
|
LC_ALL=C.UTF-8
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
|
|
|
RUN apt-get update -y
|
2018-11-27 14:19:55 -05:00
|
|
|
|
|
|
|
# Install dependencies to fix `curl https support error` and `elaying package configuration warning`
|
2018-11-02 21:10:45 -04:00
|
|
|
RUN apt-get install -y apt-transport-https apt-utils
|
2018-11-27 14:19:55 -05:00
|
|
|
|
|
|
|
# Install superset dependencies
|
|
|
|
# https://superset.incubator.apache.org/installation.html#os-dependencies
|
|
|
|
RUN apt-get install -y build-essential libssl-dev \
|
2018-10-15 12:28:39 -04:00
|
|
|
libffi-dev python3-dev libsasl2-dev libldap2-dev libxi-dev
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
2018-11-27 14:19:55 -05:00
|
|
|
# Install extra useful tool for development
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
RUN apt-get install -y vim less postgresql-client redis-tools
|
|
|
|
|
|
|
|
# Install nodejs for custom build
|
2018-11-27 14:19:55 -05:00
|
|
|
# https://superset.incubator.apache.org/installation.html#making-your-own-build
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
# https://nodejs.org/en/download/package-manager/
|
2018-11-27 14:19:55 -05:00
|
|
|
RUN curl -sL https://deb.nodesource.com/setup_10.x | bash - \
|
|
|
|
&& apt-get install -y nodejs
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
2018-11-27 14:19:55 -05:00
|
|
|
WORKDIR /home/superset
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
2018-11-27 14:19:55 -05:00
|
|
|
COPY requirements.txt .
|
|
|
|
COPY requirements-dev.txt .
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
2018-11-27 14:19:55 -05:00
|
|
|
RUN pip install --upgrade setuptools pip \
|
|
|
|
&& pip install -r requirements.txt -r requirements-dev.txt \
|
|
|
|
&& rm -rf /root/.cache/pip
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
2018-11-27 14:19:55 -05:00
|
|
|
COPY --chown=superset:superset superset superset
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
2018-11-27 14:19:55 -05:00
|
|
|
ENV PATH=/home/superset/superset/bin:$PATH \
|
|
|
|
PYTHONPATH=/home/superset/superset/:$PYTHONPATH
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
2019-01-13 11:37:37 -05:00
|
|
|
USER superset
|
|
|
|
|
2018-11-27 14:19:55 -05:00
|
|
|
RUN cd superset/assets \
|
2018-12-22 19:44:31 -05:00
|
|
|
&& npm ci \
|
2018-12-21 13:24:49 -05:00
|
|
|
&& npm run build \
|
|
|
|
&& rm -rf node_modules
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
2018-11-27 14:19:55 -05:00
|
|
|
COPY contrib/docker/docker-init.sh .
|
|
|
|
COPY contrib/docker/docker-entrypoint.sh /entrypoint.sh
|
|
|
|
ENTRYPOINT ["/entrypoint.sh"]
|
Init docker for local development environment. (#4193)
This commit will try to dockerize superset in local development
environment.
The basic design is:
- Enable superset, redis and postgres service instead of using sqlite,
just want to simulate production environment settings
- Use environment variables to config various app settings. It's easy to
run and config superset to any environment if we use environment than
traditional config files
- For local development environment, we just expose postgres and redis
to local host machine thus you can connect local port via `psql` or
`redis-cli`
- Wrap start up command in a standard `docker-entrypoint.sh`, and use
`tail -f /dev/null` combined with manually `superset runserver -d` to
make sure that code error didn't cause the container to fail.
- Use volumes to share code between host and container, thus you can use
your favourite tools to modify code and your code will run in
containerized environment
- Use volumes to persistent postgres and redis data, and also
`node_modules` data.
- If we don't cache `node_modules` in docker volume, then every time
run docker build, the `node_modules` directory, will is about 500 MB
large, will be sent to docker daemon, and make the build quite slow.
- Wrap initialization commands to a single script `docker-init.sh`
After this dockerize setup, any developers who want to contribute to
superset, just follow three easy steps:
```
git clone https://github.com/apache/incubator-superset/
cd incubator-superset
cp contrib/docker/{docker-build.sh,docker-compose.yml,docker-entrypoint.sh,docker-init.sh,Dockerfile} .
cp contrib/docker/superset_config.py superset/
bash -x docker-build.sh
docker-compose up -d
docker-compose exec superset bash
bash docker-init.sh
```
2018-06-10 00:26:41 -04:00
|
|
|
|
|
|
|
HEALTHCHECK CMD ["curl", "-f", "http://localhost:8088/health"]
|
|
|
|
|
|
|
|
EXPOSE 8088
|