misc & cleanup

lua/core/bootstrap.lua

@@ -16,12 +16,11 @@ M.lazy = function(install_path)
 
   -- install plugins + compile their configs
   require "plugins"
-  require("lazy").load { plugins = { "nvim-treesitter" } }
 
-  -- install binaries from mason.nvim & tsparsers on LazySync
-  vim.schedule(function()
+  vim.api.nvim_buf_delete(0, { force = true }) -- close lazy window
+
+  vim.defer_fn(function()
     vim.cmd "silent! MasonInstallAll"
-    -- print success message
   end, 0)
 end
 
@@ -31,7 +30,6 @@ M.gen_chadrc_template = function()
     vim.cmd "redraw|echo ''"
 
     if input == "y" then
-      -- clone example_config repo
       print "cloning chadrc starter template repo...."
 
       vim.fn.system {
@@ -50,6 +48,21 @@ M.gen_chadrc_template = function()
       vim.loop.fs_rmdir(vim.fn.stdpath "config" .. "/lua/custom/.git")
       vim.notify "successfully installed chadrc template!"
       vim.cmd "redraw|echo ''"
+    else
+      local custom_dir = vim.fn.stdpath "config" .. "/lua/custom/"
+      vim.fn.mkdir(custom_dir, "p")
+
+      local str = [[
+              local M = {}
+                M.ui = {
+                  theme = "onedark",
+               }
+              return M
+           ]]
+
+      local file = io.open(custom_dir .. "chadrc.lua", "w")
+      file:write(str)
+      file:close()
     end
   end
 end

lua/core/init.lua

@@ -5,7 +5,7 @@ vim.env.PATH = vim.env.PATH .. (is_windows and ";" or ":") .. vim.fn.stdpath "da
 local new_cmd = vim.api.nvim_create_user_command
 
 new_cmd("NvChadUpdate", function()
-  require("nvchad").update_nvchad()
+  require "nvchad.update"()
 end, {})
 
 -- autocmds
@@ -19,37 +19,22 @@ autocmd("FileType", {
   end,
 })
 
-local sep = vim.loop.os_uname().sysname:find "windows" and "\\" or "/"
-
 vim.api.nvim_create_autocmd("BufWritePost", {
-  pattern = vim.fn.glob(
-    table.concat({
-      vim.fn.stdpath "config",
-      "lua",
-      "custom",
-      "**",
-      "*.lua",
-    }, sep),
-    true,
-    true,
-    true
-  ),
-
+  pattern = "chadrc.lua",
   group = vim.api.nvim_create_augroup("ReloadNvChad", {}),
 
-  callback = function(opts)
+  callback = function()
     require("plenary.reload").reload_module "base46"
-    local file = string
-      .gsub(vim.fn.fnamemodify(opts.file, ":r"), vim.fn.stdpath "config" .. sep .. "lua" .. sep, "")
-      :gsub(sep, ".")
-    require("plenary.reload").reload_module(file)
-    require("plenary.reload").reload_module "custom.chadrc"
+    local config = require("core.utils").load_config()
 
-    local config = require("core.utils").load_config().ui
+    vim.opt.statusline = "%!v:lua.require('nvchad_ui.statusline." .. config.ui.statusline.theme .. "').run()"
+    vim.g.nvchad_theme = config.ui.theme
+    vim.g.transparency = config.ui.transparency
 
-    vim.opt.statusline = "%!v:lua.require('nvchad_ui.statusline." .. config.statusline.theme .. "').run()"
+    -- reload cmp  stuff
+    require("plenary.reload").reload_module "plugins.configs.cmp"
+    require("cmp").setup(require "plugins.configs.cmp")
 
     require("base46").load_all_highlights()
-    -- vim.cmd("redraw!")
   end,
 })

lua/core/mappings.lua

@@ -1,9 +1,5 @@
 -- n, v, i, t = mode names
 
-local function termcodes(str)
-  return vim.api.nvim_replace_termcodes(str, true, true, true)
-end
-
 local M = {}
 
 M.general = {
@@ -20,8 +16,6 @@ M.general = {
   },
 
   n = {
-    ["<ESC>"] = { "<cmd> noh <CR>", "no highlight" },
-
     -- switch between windows
     ["<C-h>"] = { "<C-w>h", "window left" },
     ["<C-l>"] = { "<C-w>l", "window right" },
@@ -38,16 +32,6 @@ M.general = {
     ["<leader>n"] = { "<cmd> set nu! <CR>", "toggle line number" },
     ["<leader>rn"] = { "<cmd> set rnu! <CR>", "toggle relative number" },
 
-    -- update nvchad
-    ["<leader>uu"] = { "<cmd> :NvChadUpdate <CR>", "update nvchad" },
-
-    ["<leader>tt"] = {
-      function()
-        require("base46").toggle_theme()
-      end,
-      "toggle theme",
-    },
-
     -- Allow moving the cursor through wrapped lines with j, k, <Up> and <Down>
     -- http://www.reddit.com/r/vim/comments/2k4cbr/problem_with_gj_and_gk/
     -- empty mode is same as using <cmd> :map
@@ -61,7 +45,9 @@ M.general = {
     ["<leader>b"] = { "<cmd> enew <CR>", "new buffer" },
   },
 
-  t = { ["<C-x>"] = { termcodes "<C-\\><C-N>", "escape terminal mode" } },
+  t = {
+    ["<C-x>"] = { vim.api.nvim_replace_termcodes("<C-\\><C-N>", true, true, true), "escape terminal mode" },
+  },
 
   v = {
     ["<Up>"] = { 'v:count || mode(1)[0:1] == "no" ? "k" : "gk"', "move up", opts = { expr = true } },
@@ -96,9 +82,6 @@ M.tabufline = {
       "goto prev buffer",
     },
 
-    -- pick buffers via numbers
-    ["<Bslash>"] = { "<cmd> TbufPick <CR>", "Pick buffer" },
-
     -- close buffer + hide terminal buffer
     ["<leader>x"] = {
       function()

lua/plugins/configs/others.lua

@@ -21,10 +21,7 @@ M.blankline = {
 }
 
 M.luasnip = function()
-  local options = {
-    history = true,
-    updateevents = "TextChanged,TextChangedI",
-  }
+  local options = { history = true, updateevents = "TextChanged,TextChangedI" }
 
   require("luasnip").config.set_config(options)
 

lua/plugins/init.lua

@@ -99,7 +99,7 @@ local default_plugins = {
           if vim.v.shell_error == 0 then
             vim.api.nvim_del_augroup_by_name "GitSignsLazyLoad"
             vim.schedule(function()
-              require("lazy").load { plugins = "gitsigns.nvim" }
+              require("lazy").load { plugins = { "gitsigns.nvim" } }
             end)
           end
         end,